How can we help?

General FAQ

4K Video Encoder/Decoder

Medical Video Recorder

PTZ Camera

AI PTZ Camera

PTZ Controller

Streaming Encoder

Surgical Video Camera

How to Decode NDI Source

1.Please first ensure that your ZowieBox has activated NDI.

Click Setting->System->NDI to ensure that NDI is activated.

2.Switch ZowieBox to decoder mode as shown in the link below.

http://liberal-technology.com/knowledge-base/how-to-switch-to-decoder-mode

3.Click Setting->Decoding->NDI to select the required NDI stream. ZowieBox will automatically display the searched NDI sources.

If ZowieBox’ s version is before 1.0.2.10, the page is as follows:

4.Please keep the output resolution consistent with the resolution of the NDI source, the link is as follows:

http://liberal-technology.com/knowledge-base/how-to-switch-output-resolution-in-decoder-mode/

Tips:

  1. Please ensure that ZowieBox and NDI source are in the same network segment. Otherwise ZowieBoxwill prompt No Video
  2. ZowieBox supportsdecodingNDI sources whose format is HX/HX2/HX3 and rate is less than 60M. If the NDI source is Full NDI or other NDI format, please use NDI Bridge to convert it to HX format.

http://liberal-technology.com/knowledge-base/why-is-not-zowiebox-decode-ndi-source-from-vlc-ndi-obs-etc-supported/

Previous Document
The difference between New Gen ZowieBox and ZowieBox